Water Boilers

DUNKIRK Plymouth Xtreme Series Standing Pilot Gas-Fired Hot Water Boilers

Part Number: PWXL Series
Manufacturer: Dunkirk
Description: Dunkirk Updated their PWX Series boilers and changed to PWXL
New features include:
Combination Aquastat & LWCO

• Combination Aquastat & LWCO in one control – no need to pipe or wire the control saving the installer time and money.
• Boiler complies with State codes that require a low water cutoff for broader application
• Quick Molex plug connections for:
• Vent damper
• Circulating pump
• 100% factory tested in a low water condition

High Quality Digital Display

• Controls concealed behind easily removable cover for quick access and tamper prevention
• High and low limit settings with adjustable differentials easily set by turning 4 dials – no programming
• Installer option to setup the boiler to maintain water temperature

Status Indicator Lights

• At-A-Glance diagnostic capability.
• Power – Green
• High Limit – Yellow
• T-Stat/circ – Green
• Low Water – Red

DUNKIRK Plymouth Steam II Standing Pilot Gas-Fired Boilers

Part Number: PVSB Series
Manufacturer: Dunkirk
Description:

• Assembled boiler with insulated jacket
• Two 2-1/2? supply tappings and two 2-1/2? return tappings
• Integral draft diverter – built into jacket
• Pressure limit control
• Electronic probe-type low water cut-off
• Flame rollout safety shut-off fuse link and blocked vent safety shut-off switch with spare fuse link included
• Sight glass water level gauge
• Steam pressure gauge
• 15 lb ASME Pop safety valve
• Two 2-1/2? square head pipe plugs
• Vent damper
• Completely installed and wired gas control systems with burners and manifold consisting of:
• Titanium composite burners
• Automatic redundant combination gas valve, 24 volt

DUNKIRK D248 Series Commercial Hot Water Gas-Fired Boilers

Description:

• Cast iron sections and push nipples
• Electronic ignition
• Space-saving profile
• Baked enamel steel jacket
• Modular combination bases
• Easy access and maintenance
• Limit control (two required on units 2,500,000 BTU)
• Pressure temperature gauge
• Relief valve
• Drain valve
• Vent damper
• Complete jacket assembly

Series MI85

• 85% AFUE
• Venting: Natural Draft
• Trim: Water
• Ignition: Spark
• Construction: Cast Iron
• Fuel: Gas-Fired

Features:

• Natural Gas
• Natural Draft Venting
• Spark Ignition
• Low Profile Design
• Ideal for lower clearance/space limited areas

Series MI

• 82% AFUE
• Venting: Natural Draft
• Trim: Water
• Ignition: Standard Pilot or Intermittent Ignition
• Construction: Cast Iron
• Fuel: Gas-Fired (Natural or LP)

Features:

• Natural Gas
• Natural Draft Venting
• Standard Pilot or Intermittent Ignition
• Low Profile Design
• Simple to Install and Service

Series MIHII

• 84% AFUE
• Venting: Natural Draft
• Trim: Water
• Ignition: Spark
• Construction: Cast Iron
• Fuel: Gas-Fired

Features:

• Natural Gas
• Natural Draft Venting
• Spark Ignition
• Low Profile Design
• Ideal for lower clearance/space limited areas

Lochinvar’s Knight Boilers Feature:

• Modulating Burner with 5:1 Turndown
• Vertical and Horizontal Direct Vent
• ASME Stainless Steel Heat Exchanger
• Automatic Reset High Limit
• Inlet & Outlet Temperature Sensors
• WATER BOILERS Circulating Pump
• 30 psi ASME Relief Valve
• Zero Clearances to Combustible Material
• SMART SYSTEM Digital Operating Control

SMART SYSTEM Digital Operating Control Features:

• 2 line, 16 Character Display
• Dual Level Password Security
• Domestic Hot Water Prioritization
• Built In Cascading Sequencer For Up To 8 Boilers
• 0-10 VDC Input Control
• Outdoor Reset Control With Outdoor Air Sensor
• Low Water Flow Safety Control & Indication
• Alarm On Any Failure Contacts
• Service Reminder
• Freeze Protection
• Night Setback
• Time Clock
• Three Pump Control (System, Boiler & DHWP)
• Data Logging (Ex: Hours Running, Space Heating)
• Programmable System Efficiency Optimizers (Ex: Anti-cycling, Ramp Delay)

CGS-C STEAM SERIES

The Right Choice

When the time comes to replace your existing boiler, and you need a reliable and affordable heat source, ask your contractor about the New Yorker CGS-C Series.

Replacing a steam heating system is a big decision and many factors must be evaluated. When you choose the New Yorker CGS-C, all those decisions can be made easily. An Economical Choice

The CGS-C cast iron boiler design maximizes heat transfer for the most efficient use of fuel &mdash saving your valuable heating dollars. A Reliable Choice

The New Yorker CGS-C Series Boiler uses only name brand controls and accessories, giving you years of comfortable, reliable heating. The CGS-C Series cast iron heat exchanger, with metal section connectors, is immune topetroleum based chemicals &mdash such as those used to clean steam boilers &mdash which can deteriorate rubber seals used by some competitors. This means a longer boiler life and peace of mind for you.

• New Yorker stands behind WATER BOILERS and heat exchanger of the CGS-C Series with a 10-Year Limited Warranty. See your installing contractor for more warranty information.
• The cast iron heat exchanger is designed for easy maintenance during yearly service calls, saving you money.
• The heat exchanger design and construction meet the requirements of the ASME Boiler and Pressure Vessel Code&mdashthis ensures quality and safety for you.
• The CGS-C Series is available as a completely packaged boiler which saves time and money when installing.
• An Annual Fuel Utlilization Efficiency (AFUE) up to 81.5% makes the CGS-C a solid investment for years to come.

PVCG-B WATER SERIES

Fully Updated for DOE 2012 Compliance!

When the time comes to replace your existing boiler, and you need a reliable and affordable heat source, ask your contractor about the New Yorker PVCG-B Series.

An Economical Choice

The cast iron boiler design maximizes heat transfer for the most efficient use of fuel… saving you valuable heating dollars. The PVCG-B comes standard with an evergy-saving “thermal purge” feature that circulates residual warm water in heating system prior to firing the boiler!

A Reliable Choice

The New Yorker PVCG-B Series WATER BOILERS uses only name brand controls and accessories, giving you years of comfortable, reliable heating.

The PVCG-B Series’ cast iron heat exchanger, with metal section connectors, is immune to petroleum based chemicals such as anti-freeze which can deteriorate rubber seals used by some competitors. This means a longer boiler life and peace of mind for you.

Extensivily tested & proven.

A Wise Choice

• Lifetime Limited Warranty. See your installing contractor for more information.
• The cast iron heat exchanger is designed for easy maintenance during yearly service calls, saving you money.
• The heat exchanger design and construction meet the requirements of the ASME Boiler and Pressure Vessel Code&mdashthis ensures quality and safety for you.
• Adding a boiler powered indirect water heater provides abundant hot water for domestic use, hot tubs, spas, whirlpools..